Send Message

160KW Induction Heater Machine Environmentally For Annealing Forging

1 Set
160KW Induction Heater Machine Environmentally For Annealing Forging
Features Gallery Product Description Request A Quote
Product Name: Induction Annealing Equipment
Voltage: 380V 3phase
Power: 160KW
Core Components: Circuit Board
Duty Cycle: 100% Hours Non-stop
Application: Annealing,Forging, Quenching,Melting,heat Treatment
Key Point: Safe, Environmentally, Energy Saving , High Efficient
High Light:

160KW Induction Heater Machine


Induction Heater Machine Environmentally


Annealing Induction Heater Machine

Basic Infomation
Place of Origin: CHINA
Brand Name: GY
Certification: CE, FCC,ROHS
Model Number: GYS-160AB
Payment & Shipping Terms
Packaging Details: Wooden box
Delivery Time: 5-8 workdays, based on orders
Payment Terms: T/T
Supply Ability: 500 Sets per month
Product Description

 Light Touch Screen Induction Heating Equipment Stainless Online Annealing


160KW Induction Heater Machine Environmentally For Annealing Forging 0


Annealing is a process used to release stresses and tensions in metals that may be present after various working procedures. This prevents warping or cracking of the part during its service life or in subsequent working operations. Annealing consists of three stages. The first is known as the Recovery Stage, where the material is heated to a temperature where the internal stresses of the material are relieved. Next is the Recrystallization Stage. At this stage, the material is held at a temperature known as the Recrystallization Temperature for a long enough time for new grains to begin forming. The stage may be absent in certain metals such as steel. Lastly, the Grain Groth stage is where the material is slowly cooled down to allow time for the new grains to form. The rate at which the material is allowed to cool determines the rate of grain growth.


160KW Induction Heater Machine Environmentally For Annealing Forging 1



160KW Light Touch Screen Induction Annealing Equipment Stainless Online Annealing


Application Stainless steel online annealing
Work power 340V-430V Out power 160KW
Product size main : 1000x695x1100mm Certificate CE,SGS, ROHS
  transformer : 870x430x750mm    


The paramerters of 160KW Light Touch Screen Induction Annealing Equipment Stainless Online Annealing:


Model GYS-160AB (Three phase)
Work power 340V-430V
Maximum input current 240A
Output power 160KW
Fluctuating frequency 10-50KHZ
Output current 400-6500A
The flow rate of cooling water 0.08-0.16Mpa 15L/Min
Water temperature protection point 50C
Product size main : 1000x695x1100mm
transformer : 870x430x750mm
Net weight main : 155kgs
transformer : 95kgs





160KW Induction Heater Machine Environmentally For Annealing Forging 2



1. Heat treatment of metals: hardening, tempering, and annealing.


2. Heating prior to deformation: forging, swaging, upsetting, bending, and piercing.


3. Brazing and Soldering: brazing of steel, brass, and copper to each other in combination and aluminum to aluminum.


4. Shrink fitting: In any manufacturing process, for example, shrink fitting of motor rotors to shafts, shrink fitting of shell casings for compressors.


5. Coating: Of dissimilar metals, prior to insulation, and curing, such as paint.


6. Melting: Of all types of metals.


7. Other applications include crystal growing, cap sealing, sintering, carbon vapor deposition, levitation, exit axial deposition, and plasma generation.

induction heating machine, induction quenching machine

160KW Induction Heater Machine Environmentally For Annealing Forging 4



1. Fast heating: the minimum rate of heating is less than 1 second (rate of heating is available for adjustment and control).


2. Wide coverage of heating: it can be used to heat various metal parts (replace removable induction coil as per different operating switches).


3. Easy installation: it can be used once it is connected with power source, induction coil as well as water supply pipe and rising pipe; it is small in size and light in weight.


4. Easy operation: you can learn to operate it within several minutes.


5. Fast start-up: it can be started to perform heating operation on condition that water and power supply is available.


6. Low power consumption: As compared with conventional vacuum tube high frequency equipments, it can save the power by approximately 70%. The smaller the size of the work piece is, the lower power consumption would be.


7. High effectiveness: it has such features as uniform heating (it is applicable to adjust the spacing of the induction coil to ensure the appropriate temperature as required by each part of work piece), fast warming and limited oxic horizon, and can guard against any waste after annealing.


8. Comprehensive protection: it has such functions as overpressure, over-current, overheat and water shortage alarm indications as well as automatic control and protection.


9. Controllable temperature: it is applicable to control the temperature for heating work pieces as per the preset heating time, and thereby control the heating temperature at a certain technical point.


10. Comprehensive full load design: it can work continuously for 24 hours.


11. Small size and light weight: it has a weight of only several dozens of kilograms, of which, the limited floor space can effectively save the workshop space.


12. Elimination of high voltage: it requires no step-up transformer which may produce approximately ten thousand voltage, and thus can ensure the maximum safety.

160KW Induction Heater Machine Environmentally For Annealing Forging 5

160KW Induction Heater Machine Environmentally For Annealing Forging 6


induction heating machine, induction quenching machineinduction heating machine, induction quenching machine


160KW Induction Heater Machine Environmentally For Annealing Forging 9

Welcome to GY

GY had developed many years of research and is committed to providing customers with all kinds of medium frequency, high frequency, super audio frequency,ultrahigh frequency induction heating equipment, and automation equipment. We provide solutions for project planning, development, design, manufacturing and comprehensive after-sales service according to your needs. One-stop solutions for customer heat treatmen tneeds.The lates tDSP+FPGA all-digital control system products provide more professional, more accurate solutions and personalized high-quality products for many users on the road of innovation, transformation and transformation break throughs.



From 1996, devoted

For more than 27 years, GY has always been adhering to the company philosophy of innovation, adherence to quality and excellent operation. A single R&D office researches a single product. After more than 20 years of hard work, it has developed steadily. The current equipment users cover many industries such as manufacturing, electric power and nuclear power,government science reform, university scientific research, and special military industry. In view of the different voltage levels
in some countries, the company has developed special input voltage induction heating equipment for different frequency parameters. For example, the input voltage suitable for use i n the United States, Japan and other countries is single-phase 110V, three-phase 110V, three-phase 220V, and three-phase 480V. Heating equipment and heating equipment with input voltage of three-phase 415V and three-phase 440V suitable for use in Southeast Asian countries such as Malaysia, Australia and Thailand Inheritance builds trust.


Inherit and build trust

Made in China is facing global competition and challenges. To find a suitable position in the international and domestic markets and open up a larger market, we must use more advanced technology and good after-sales service to improve ourselves. We will always be committed to the application and promotion of GY series products in the market with the spirit of pursuing professionalism, excellence and perseverance, and seek cooperation with suppliers, agents and users with professional technical support and good business collaboration. Common development and progress.


market to world


Recommended Products
Get in touch with us
Tel : +8618682187559
Fax : 86-769-22780951
Characters Remaining(20/3000)